PDA

View Full Version : Modding the new Xbox 360 Slim Hard Drive



Tactics
08-15-2010, 12:09 AM
Hey guys,

I started to miss my Modio days so I decided to get back up and running. First off, I have no clue if this was already posted elsewhere. All content here is strictly mine. Don't bitch either or I will cut you.


For this tutorial I will already assume you have the current modding tools which you used previously with the original Xbox 360. Basically we are going to accomplish getting your hard drive on your desktop.
(Click images to enlarge)

First Step:

Hopefully you were like me and had several Hard Drives laying around for the original xbox 360. If so, you are in luck - if not, go buy the cheapest one you can find.

Second Step:

The hard drive is actual just a piece of large plastic (lol) with the good stuff inside. Open the original hard drive and you should find a cable like this:

164

After seeing the cable you should automatically assume what we will be doing next.

Third Step:
Now I'm going to just start showing the photos as this is all very self explanatory.

165

166

167

168

169


Upon pluging into your computer's USB port you should be able to hear the Hard Drives motor go. If not, turn the port around (fat male piece)

I have tested this and YES, I can access my hard drive using Modio. I have a feeling if you take the RAW hard drive (picture below) and shove it into the new Xbox 360 Slim, you should be able to use the hard drive (that I have not tested yet).

170

Have fun bitches